1、主要用于大型荒料整形，适于厂内使用/Mainly used for block cutting and trimming in workshop.
2、采用4米长的固定轨道进行导向，使得切割后的荒料表面更整齐、更光洁/Use 4m fixed track to guide the direction, which make the cutting surface smooth and clean.
3、采用大功率变频器控制飞轮主电机的旋转速度+小变频器控制设备的行走速度；PLC控制/use one big inverter to control the rotation speed of the flywheel(the main motor), one small invertoer to control the traverse speed of the machine.control by PLC.
4、具有断绳保护功能/Have pcotection system when wire rope broken.
5、在切割时可实现串珠绳恒张力及行走小车运行速度的自动控制可实现手动、自动控制的自动切换功能，即停止手动调协，系统将自动转入自动控制状态能实时跟踪负载的变化情况，科学调整机台的行走速度，使串珠绳始终处于较佳的工作状态。/make the Diamond Wire Saw Strain constantly and the speed of moving truck automatically controlled;make the control manually or automatically, that is when stop manually operating,it will automatically turn to the state of self-driven.allow the Diamond Wire Saw work efficiently all the time by changing the speed of the moving machine according to the tracking of the load.
6、在设备的前后两端装有限位开关，防止主传动机构撞到机架，起到保护作用/equip limit-location switch in front and back of the machine, which protect and avoid the main driving structure striking the machine frame.
7、在操作部位的前端加装了防护罩，起到防水，防断绳的保护作用/equip one shield in front of the operation part, which can protect when water supply is cut off or wire rope is broken. |
|
|
|
|
